Residential Asphalt in Polson, MT

Straight-up residential asphalt paving and repair for homes right here in Polson, Montana.

Get Your Free Estimate

What Goes Into a Residential Asphalt Driveway Job in Polson

Residential Asphalt covers everything from laying down a brand new driveway from scratch to tearing out your old, cracked surface and replacing it with fresh hot-mix. When Aim High Asphalt Co takes on a residential job, we handle the whole thing: excavation, grading the sub-base, laying down crushed aggregate stone, and paving commercial-grade asphalt right to your garage apron. You end up with a solid parking surface that looks sharp and drains water away from your foundation.

Aim High Asphalt Co starts every job by looking at how your yard slopes and where the water runs. Montana weather throws a lot at your driveway, from heavy spring runoff to freezing January nights. If you do not get the base right, the Residential Asphalt will not last two seasons. We use heavy-duty compactors to pack down the sub-base before a single ton of hot liquid asphalt touches your property. We lay the asphalt hot, rolling it down until it hits the right thickness and density to handle your pickup truck or SUV.

Polson weather is tough on pavement. Between the freeze-thaw cycles on the Flathead Lake shores and the scorching summer sun, cheap asphalt turns to gravel in a few years. Aim High Asphalt Co mixes our asphalt to handle these temperature swings. We also grade driveways so ice-melt and rain do not pool up and freeze into a skating rink right outside your front door.

Homeowners often worry about how long the process takes and how soon they can park on the new surface. Most standard residential driveways take two to three days from the initial tear-out to the final roll. You can usually walk on the fresh asphalt the next day, and you can park your car on it after about three to five days, depending on how hot the sun is baking it.

Aim High Asphalt Co stands behind our paving work with a straightforward guarantee on our craftsmanship. You will not find hidden fees or surprise charges on your invoice. We show up when we say we will, do the job right the first time, and leave your property cleaner than we found it. For homes and businesses in Polson, Aim High Asphalt Co provides Residential Asphalt services.

How Long Does Residential Asphalt Last in Polson's Climate?

Aim High Asphalt Co knows Polson, MT. A well-built Residential Asphalt driveway in Polson typically lasts between 15 and 20 years if you take care of it. The biggest enemy to your pavement is water getting into small cracks and freezing, which rips the asphalt apart from the inside out during winter.

Because we deal with heavy snowplows, studded tires, and massive temperature swings around the lake, the quality of the Residential Asphalt installation matters more here than in milder climates. Skimping on the gravel base or rolling thin Residential Asphalt means you will be calling someone to patch potholes in three years instead of enjoying a solid driveway for two decades.

Routine maintenance makes a big difference in how long your Residential Asphalt holds up. Sealing your driveway every few years keeps the UV rays from drying out the binder and stops moisture from seeping into the sub-base. A little preventative care keeps your paving investment solid for the long haul. For homes and businesses in Polson, Aim High Asphalt Co provides Residential Asphalt services.

Our Four-Step Paving Process

1

Excavation and Site Prep

Aim High Asphalt Co digs out the old dirt, sod, or ruined pavement down to stable sub-grade soil. Our team hauls away the debris and grades the area so water drains away from your house in Polson, MT. For Residential Asphalt projects, Residential Asphalt excavation and grading are very important to make sure the base is solid. We provide Residential Asphalt services for homes and businesses in Polson.

2

Base Rock Installation

Aim High Asphalt Co dumps several inches of crushed aggregate stone and runs heavy vibrating compactors over it during Residential Asphalt installation in Polson, MT. This creates a solid foundation that stops your driveway from sinking or rutting later. For homes in Polson, Aim High Asphalt Co is here for all your Residential Asphalt needs.

3

Hot-Mix Paving

Aim High Asphalt Co hauls in hot asphalt straight from the plant and lays it down using a commercial paving machine. Our team sets the proper crown and thickness so moisture runs off the sides of your new Residential Asphalt surface in Polson, MT. For homes and businesses in Polson, Aim High Asphalt Co provides Residential Asphalt services.

4

Compacting and Finishing

Aim High Asphalt Co rolls the hot asphalt with heavy steel-wheel rollers to lock the aggregate together and create a smooth, dense surface. Once it cools down, your new Residential Asphalt driveway in Polson, MT is ready for traffic. For homes and businesses in Polson, Aim High Asphalt Co provides Residential Asphalt services.

Paving Homes Around Polson and Lake County

Aim High Asphalt Co works on residential properties all over Polson, from houses right up near the Flathead Lake shore out toward Pablo and Kerr Dam. Every neighborhood has its own soil quirks, whether you are dealing with heavy clay near the water or rocky ground up on the ridges.

Aim High Asphalt Co knows local conditions because our team lives and work here too. We show up with the right equipment for local driveways, whether you need a short suburban approach or a long rural lane out past Finley Point. For homes and businesses in Polson, Aim High Asphalt Co provides Residential Asphalt services.

Frequently Asked Questions

A new Residential Asphalt driveway in Polson typically costs between $4 and $7 per square foot, depending on the amount of excavation and base work needed. Every property in Polson is different, so Aim High Asphalt Co comes out and looks at your site before giving you a firm, no-surprise price. The final price for Residential Asphalt includes tearing out the old material, hauling in fresh aggregate base, and laying down commercial-grade hot-mix asphalt. Aim High Asphalt Co provides Residential Asphalt services for homes in Polson, Montana.
Aim High Asphalt Co recommends that homeowners wait at least three to five days before parking any vehicle on a newly paved Residential Asphalt driveway in Polson, MT. The hot summer sun in Polson can keep the asphalt pliable much longer, so waiting a few extra days on hot days prevents tire ruts. Residents can usually walk on the fresh Residential Asphalt surface after 24 hours, but heavy delivery trucks and motorcycles must be kept off the new pavement for at least a week.
Aim High Asphalt Co provides Residential Asphalt services for homeowners in Polson, MT. You can pave an asphalt overlay directly over your old asphalt only if the existing base is still stable and the surface is not heavily cracked or crumbling. If your current driveway has alligator cracking, deep dips, or tree roots pushing it up, we have to tear it out and rebuild the base rock. Laying fresh Residential Asphalt over a failed base is a waste of money because the new surface will just crack right along the old lines. For properties in Polson, MT, a proper base is required before any new Residential Asphalt can be installed.
Aim High Asphalt Co knows the weather patterns in Polson, MT very well. The best time to pave a residential asphalt driveway in Polson is between late spring and early fall when daytime temperatures stay consistently above 50 degrees. Montana winters are very cold for hot asphalt to stay workable long enough to roll properly. Aim High Asphalt Co requires warm weather and dry ground to get the compaction right and make sure the pavement bonds properly. For homeowners in Polson, Aim High Asphalt Co provides Residential Asphalt services.

Ready to Talk About Your Project?

Tell us what you need and someone will get back to you quickly. No pressure, no commitment.

Call 406-369-6364

← Back to Home